OpenID Connect 1.0 SSO deprecated

Introduction

With version 7.10.0 App Suite introduces the support for Single Sign On (SSO) with OpenID which is also compatible with version 7.8.4. OpenID Connect 1.0 is a simple identity layer on top of the OAuth 2.0 protocol. It enables Clients to verify the identity of the End-User based on the authentication performed by an Authorization Server, as well as to obtain basic profile information about the End-User in an interoperable and REST-like manner. The implementation supports handling of multiple OpenID providers (OP) for different hosts from one single instance. Logout with termination of the OPs session is available alongside an autologin mechanism which checks for a valid OP session before login. So far only the code flow for login and a third party initiated login are supported. There is also no possibility to gather additional user information from an OP after authorization so far. The session status mechanism with two communicating IFrames like suggested by the standard is also not supported.

The full OpenID specification can be found here.

An operator guide to setup Keycloak as an Authorization Server can be found here.

Feature overview

  • Web SSO using Authorization Code Grant
  • HTTP API login with username/password using Resource Owner Password Credentials Grant
  • Autologin with valid session confirmation on OP side
  • Direct autologin via session storage in own OIDC Cookie
  • Logout with additional redirect to OP for session termination
  • Direct logout from App Suite
  • OAuth token refresh
  • Third Party initiated login
  • Multiple registration of OpenID backends in one instance
  • Multiple tenants working with one backend
  • Back- and frontchannel logout

Supported Message Flows

Login as well as optionally front- and backchannel logout flows are supported. App Suite logout is either with termination of the OP session or without. There are also two autologin flows supported, one with redirect to the OP for a valid session check and one without.

Web SSO login flow

The following diagram describes the whole code flow login process. The current implementation does not gather additional user informations like described in step 6.

Code flow login

API login flow

OX Mail, Exchange-ActiveSync, CalDAV/CardDAV or other clients/protocols might only support direct username/password authentication. It is possible to still use OpenID Connect for according authentication requests, by using the Resource Owner Password Credentials Grant, which is part of the OAuth 2.0 Core Framework. This is an optional feature that needs to be enabled explicitly via the com.openexchange.oidc.enablePasswordGrant configuration property.

OAuth Tokens

An OAuth bearer access token is always required to be issued along with the ID token!

Note that OAuth tokens contained in token responses are always set as session parameters and internally validated on each request. If the Authorization Server issues an access token with expiry date, this date will determine how long the App Suite session can be used. OIDC sessions will be terminated on the first request that happens after expires_in - (com.openexchange.oidc.oauthRefreshTime / 1000) seconds.

If a refresh token is contained in the token response, access tokens will be refreshed during the first request that happens after expires_in - (com.openexchange.oidc.oauthRefreshTime / 1000) seconds. A failed refreshed due an invalid/revoked refresh token or an invalid_grant response will lead to the session being terminated.

If an ID Token is returned as a part of a token refresh request, the following requirements apply (see openid-connect-core-1.0, section 12.2):

  1. The iss claim value of the new ID Token MUST be the same as the iss claim value in the original ID Token issued during the initial authentication.

  2. The sub claim value of the new ID Token MUST be the same as the sub claim value in the original ID Token issued during the initial authentication.

  3. The iat Claim of the new ID Token MUST represent the time when the new ID Token is issued.

  4. The aud claim value of the new ID Token MUST be the same as the aud claim value in the original ID Token issued during the initial authentication.

  5. If the original ID Token contains an auth_time Claim, the value of the auth_time Claim in the new ID Token MUST represent the time of the original authentication, not the time when the new ID Token is issued.

  6. The azp claim value of the new ID Token MUST be the same as the "azp" claim value in the original ID Token issued during the initial authentication. If the original ID Token did not contain an azp Claim, the new ID Token MUST NOT include one.

A failed refresh due an invalid ID token will lead to the session being terminated.

If expires_in is not contained in the token response, the session will live as long as the configured short-term session lifetime, no matter if a refresh token is contained or not. The access token will never be refreshed in that case.

Autologin with check for a valid OP session

Autologin via OP

If no valid session is present on side of the OP, the user is asked to login first. The handling on side of the Relying party is untouched by this scenario.

Autologin directly in App Suite

Autologin direct

If no OIDC cookie exists, the standard login procedure is triggered.

Logout with redirect to OP and termination of session

Logout via OP

To enable the logout with previous termination of the OP session, the com.openexchange.oidc.ssoLogout property has to be set to true. Additionaly the com.openexchange.oidc.rpRedirectURIPostSSOLogout property has to be configured to redirect the user to the logout mechanism that handles the response on App Suite site. This location has to be registered and known for the client, otherwise the logout request will not be handled. Finally, property com.openexchange.oidc.rpRedirectURILogout holds the location, where the user should be redirected after a succesful logout, a custom goodbye page, for example.

If an error occurs during the logout process, like an invalid response from the OP, the RP session is terminated anyways. Additionally there is an example implementation of the verification dialog in the examples/backend-samples repository which should work with a connect2ID OpenID server. The according project is com.openexchange.sample.c2id-logout-page-jsp. The example is called with the following parameters:

  id_token_hint:eyJraWQiOiJDWHVwIiwiYWxn...
  post_logout_redirect_uri:https://192.168.33.109//appsuite/api/oidc/logout
  state:di26WOr8iZyVFReDvgsNwueDolfgwuB1rpjbo3t99Wo
  • id_token_hint: The users id token, to acquire the correct session.
  • post_logout_redirect: Where should the user be redirected after the confirmation.
  • state: A generated state property, to verify the response later.

Direct Logout from App Suite

Logout direct

The direct logout without termination of the OP session is enabled by default, the property is com.openexchange.oidc.ssoLogout which is set to false.

Third-Party Initiated Login

For the third-party initiated login, there are 3 parameters which are processed by the middleware, informations about these parameters can be found here. Please note that in the current implementation, target_link_uri is only checked for equality with com.openexchange.oidc.uiWebPath.

Developers Guide

There are three relevant bundles, the com.openexchange.oidc bundle, which contains all relevant interfaces. The default implementation, contained in the com.openexchange.oidc.impl bundle, which uses the Nimbus SDK to provide the needed OpenID features, located in the com.nimbus bundle. Further details can be found here. The default implementation is designed to work with the connect2id OpenID server, per default all features can be used, except the logout via OP flow. Therefore the connect2ID server has to be extended by a logout confirmation page like described before.

The OIDC Backend

The core implementation of the OIDC Backend can be used as reference to all further implementations. To keep the needed effort as small as possible, every new implementation should extend the core com.openexchange.oidc.spi.AbstractOIDCBackend and override only those functions, that should behave differently. The configuration of every backend is loaded from an implementation of the com.openexchange.oidc.OIDCBackendConfig interface. The developer should also extend the core implementation of this interface, which is com.openexchange.oidc.spi.AbstractOIDCBackendConfig and replace only those property calls, that are different from the core configuration. This way multiple backends can share the same properties, which reduces redundancy and keeps maintenance efforts small. The com.openexchange.oidc.tools.OIDCTools provide a set of useful functions and constants, remember to have a look at those, before implementing the same for every backend.

The used Cookies

The used cookies are the open-xchange-public-session-, open-xchange-secret- and open-xchange-session- cookie.

Tokens

The OAuth access and refresh tokens are both stored in the user session, alongside with the ID token of the user. The refresh token is automatically used to get a new Access token, when needed. The IDToken usually stores the users unique identification in the sub field, but can use other claims to identify App Suite users, too. How contexts and users are resolved from an ID token is configurable and can also be overridden with custom OIDC Backends.

Operators Guide

If you want to enable this feature without starting the implemented core backend, you have to disable it by setting com.openexchange.oidc.startDefaultBackend=false. For an overview of all possible properties and their description, take a look at all OpenID properties

Configuration

You can find a description of every property on the property documentation site by searching for oidc. Alternatively, take a look at the com.openexchange.oidc.OIDCConfig and com.openexchange.oidc.OIDCBackendConfig classes.

If you don't specify a distinct UI web path for your backend, via com.openexchange.oidc.uiWebPath, you have to configure the default path of the web UI, which is used in several places, via /opt/open-xchange/etc/server.properties. If you haven't already (because of other requirements), set com.openexchange.UIWebPath to /appsuite/.

User resolution

For OX session creation, an according OX user entity needs to be resolved based on the issued ID token. Per default, it is expected that the sub claim contains a value in the form of <user-name>@<context-name>. <context-name> must be a valid login mapping of the context or the numeric context identifier. <user-name> must match the provisioned user name.

The resolution behavior is configurable to use different claims and different patterns to match claim values to lookup values. For details, see configuration documentations for the following properties:

  • com.openexchange.oidc.contextLookupClaim
  • com.openexchange.oidc.contextLookupNamePart
  • com.openexchange.oidc.userLookupClaim
  • com.openexchange.oidc.userLookupNamePart

With a customized OIDC backend, the resolution behavior can be overridden based on customer requirements.

Autologin configuration

If you want to use the OpenId login feature, you have to make sure that the regular autologin mechanism is disabled by setting the associated Sessiond property to false com.openexchange.sessiond.autologin=false. This is a crucial precondition for any of the provided autologin mechanisms.

Frontend Configuration

In order to enable the special OpenID login handling, enable the oidcLogin flag via the /opt/open-xchange/etc/as-config.yml. E.g.:

default:
    host: my-domain.com
    oidcLogin: true

Front- / Backchannel Logout

Optionally, to support "Single Sign-out" scenarios, the backend can be configured for accepting front- and backchannel logouts initiated by the OP. If one of those is enabled, a separate, Hazelcast-backed mapping for OIDC session to OX session identifiers is managed internally.

Frontchannel Logout

Support for frontchannel logout by setting com.openexchange.oidc.frontchannelLogoutEnabled to true. If enabled, a separate servlet is registered under //oidc//frontchannel_logout, which will accept frontchannel logout requests from the OP via the user agent (the "sid" parameter is required in the request to associate the OP session with the corresponding OX session properly).

Typically, the resulting URL for the logout servlet needs to be configured for the registered client at the OP as "Front-Channel Logout URL".

Backchannel Logout

Similar as above, support for backchannel logout by setting com.openexchange.oidc.backchannelLogoutEnabled to true.
If enabled, a separate servlet is registered under //oidc//backchannel_logout, which will accept backchannel logout requests from the OP (the "sid" claim is required in the logout token to associate the OP session with the corresponding OX session properly).

Also, the resulting URL for the logout servlet needs to be configured for the registered client at the OP as "Back-Channel Logout URL". Also, one needs to configure that the OIDC session identifier (as in the sid claim) is included in the logout request data ("Backchannel Logout Session Required").

Example Configuration

Example configuration based on the Keycloak setup described here:

/opt/open-xchange/etc/oidc.properties

com.openexchange.oidc.enabled=true
com.openexchange.oidc.startDefaultBackend=true

com.openexchange.oidc.hosts=appsuite.example.com

com.openexchange.oidc.ssoLogout=true

com.openexchange.oidc.clientId=appsuite.example.com
com.openexchange.oidc.clientSecret=vVl8eEWUZOEJ9QZHfOEXAMPLESECRET

com.openexchange.oidc.rpRedirectURILogout=true
com.openexchange.oidc.rpRedirectURIInit=https://keycloak.example.com/appsuite/api/oidc/init?flow=thirdParty
com.openexchange.oidc.rpRedirectURIAuth=https://keycloak.example.com/appsuite/api/oidc/auth
com.openexchange.oidc.rpRedirectURIPostSSOLogout=https://keycloak.example.com/appsuite/api/oidc/logout

com.openexchange.oidc.opIssuer=http://keycloak.example.com:8085/auth/realms/demo
com.openexchange.oidc.opAuthorizationEndpoint=http://keycloak.example.com:8085/auth/realms/demo/protocol/openid-connect/auth
com.openexchange.oidc.opTokenEndpoint=http://keycloak.example.com:8085/auth/realms/demo/protocol/openid-connect/token
com.openexchange.oidc.opJwkSetEndpoint=http://keycloak.example.com:8085/auth/realms/demo/protocol/openid-connect/certs
com.openexchange.oidc.opLogoutEndpoint=http://keycloak.example.com:8085/auth/realms/demo/protocol/openid-connect/logout

com.openexchange.oidc.uiWebPath=/

com.openexchange.oidc.failureRedirect=https://www.open-xchange.com/

com.openexchange.oidc.enablePasswordGrant=true
com.openexchange.oidc.passwordGrantUserNamePart=local-part

com.openexchange.oidc.contextLookupClaim=email
com.openexchange.oidc.userLookupClaim=email

In addition to the above configuration, Keycloak users should have the email attribute, which needs to be included in ID tokens. To enable the email attribute in ID tokens, please check Add to ID token in the the client's email attribute mapper.